Contact Us
Mortar Mixing & Plastering Pumps
Mortar Mixing & Plastering Pumps

VP 500 TMK

These are economic and highly efficient screw pumps enabling pumping and spraying applications after...

VP 500 TMK
Mortar Mixing & Plastering Pumps

VP 500 EHL

These are economic and highly efficient screw pumps enabling pumping and spraying applications after...

VP 500 EHL
Mortar Mixing & Plastering Pumps

VP 500 DHL

These are economical and highly efficient screw pumps that mix, pump and spray the pumpable mortars ...

VP 500 DHL

What is Plaster?

Gypsum is a material that is used quite a lot in the construction industry and in many sectors. Its contents consist of limestone. It has come down to the present day, usually consisting of gypsum or limestone components. Because it ensures that the painted surface is smooth, it is usually used on the wall or indoors outdoors. It consists of calcium sulfate mineral. It has many features.

  • Provides thermal insulation and sound insulation

  • It has fireproof feature.

  • He's tough. Does not wear out easily

  • It is applied by taking easy shape.

  • The moisture and humidity balance is quite good.

What Goes Into the Plaster?

It contains calcium sulfate. Since it is a non-flammable material, the frequency of application is high. Gypsum is seen as its raw material gypsum. It is formed by blending at high temperature. In order for the plaster to be obtained, it must be combined with water. Thus, the mortar is formed. Mortar is also the most used material in the construction industry. Since gypsum building stone is gypsum stone, the powdered state of gypsum is obtained by using high heat. It is also packaged and sold in this way.

How to Prepare the Plaster?

First of all, gypsum rough plaster is made. Here, the plaster is mixed with water by blending. When a smooth appearance is obtained, work begins with cava plaster. It is expected that the rough plaster will dry. After the rough plaster dries, a thin plaster is applied. For fine plaster, fine sand and water are mixed. The size of the material used for rough plaster and fine plaster varies here. More water can be mixed in thin plaster. The measurements should be well adjusted. Thus, a perfect appearance can be achieved. The grout should be mixed thoroughly so that there are no clumping problems during plastering.

ASE Plaster Machine

ASE is the first company to produce plastering machines domestically. since its establishment in 1996, it has developed itself by closely following the technological advances in the world, thus today it has managed to become the company with the widest product range in the sector in Turkey.

ASE Makina, which has the widest production infrastructure in the gypsum plaster and black plaster sector in Turkey, produces nearly fifty types of machines in the field of gypsum, mortar, plaster, screed mixing, pumping and spraying systems in its production facility on an area of 13 thousand square meters. It exports these products to more than seventy countries.

What is Satin Plaster?

Satin plaster is a method that is usually applied on plasterboard and suspended ceilings. Here, in order for the plaster to be smooth and provide a flawless appearance when applying it to the surface, it must be carefully mixed. Since it is applied before painting, the satin plaster applied before it must be of high quality in order for the paint to form more flawlessly. Satin plaster is important for the paint to be applied to create a better quality floor. It is applied to wall surfaces. It is a fairly simple operation. After applying one layer of plaster, it should be allowed to dry for a while before applying it a second time.

How is it Done?

The plaster preparation process is quite simple. Sufficient plaster and water are required. First of all, mortar is prepared by adding water to the plaster to the appropriate extent. The main thing here is that gypsum and water must be mixed well. It should be applied by mixing thoroughly to ensure a smooth appearance on the wall. after the surface is made suitable, gypsum plaster is prepared. For this, clean water and plaster are required. Jul. The amount of materials to be used is determined by the type of plaster. The plaster added to the water should be kept for a few minutes. Then, it is mixed and made ready for application.

What Holds Plaster Together?

It is the water that holds the plaster together Decently. It is applied after being thoroughly mixed with water. Gypsum is usually in powder form. It combines with water to form a mortar. To obtain a silky surface, water and plaster must be well blended. Although plaster casts are not as smooth a plaster as satin plaster; it covers the errors of rough plaster. Gypsum plaster creates a smoother surface than plaster and prepares the surface for applying satin plaster.

What Should be Considered While Plastering?

  • The size to be used in the plaster is very important. The measure of water and plaster should be well adjusted.

  • In order for the plaster mortar to be smooth, it must be thoroughly mixed.

  • Gypsum is a fireproof material. That is why its features should be well known.

  • It is much easier to prepare and apply mortar with a plastering machine.

The necessary materials for plastering are gypsum and water. That's why there is no need for much material. Gypsum can be made with little material. The quality of the plaster is very important. When buying plaster, you should pay attention to its quality.

Kara sıva makinesi, inşaat sektöründe sıva işlemlerinde kullanılır.

Kara sıva makinesinin avantajları arasında hızlı ve verimli sıva işlemleri, az iş gücü gerektirme ve daha düzgün bir yüzey oluşturma yer alır.

Kara sıva makinesi, sıva malzemesini hazneye doldurarak, basınçlı hava yardımıyla püskürtme tabancası yardımıyla yüzeye uygulanır.